50"x39" Sound Deadener, Radiant Heat Barrier Mat, Thermal Insulation Waterproof

Description

Normally when customer places 2 or more orders we combine the orders and ship them together as one continuous piece.For all heat/sound mats orders over 120", we may cut and ship in multiple packages to reduce the shipping cost. ( For example : if you order 180"x 40", You get 2 continuous Length of 90" x 40"
Before placing an order, please note that if you purchase more than 2 or more quantity we will send you several packages separately because of package size limitation and shipping cost, and will not send them together. Please understand. Thank you.
Features:
Flexible, crush resistant, non-toxic & fragrance free (Will not smell), creates a mold and mildew resistant vapor barrier.
Reduces unwanted sound and most vibrations.
Keeps your interior cooler in the summer and warmer in the winter.
Can make the heat of the engine evenly distributed to avoid overheating the lid.
Effectively blocks 97% of radiant heat transfer.
Color: Silver
Recommended Install Temperature: -10°C ~ +60°C
Resistance Temperature Range: -40°C ~ +149°C
Waterproof & fire resistant: Yes
Please allow slight dimension difference due to different manual measurement.
1) This product is 100% brand new.
2) Great For Firewalls, Floors, Doors, Boots, Side Panels. Roofs and more......
3) Keeps Heat In-Cold Out in the Winter, Keeps Cold in-Heat Out in the Summer!
4) Easily installs,fit all kinds of vehicle type
Material:
Aluminum Foil + Foam
Application:
Firewall/rear decks - To reduce engine, road, and transmission noise while dissipating heat
This is just the size we recommend, please confirm the size before purchasing.
If you want to install to another place, please confirm the length before purchasing.
Durable Sound Deadener Material Heat Insulation Block Noise & Thermal Mat Pad
Product Description
100% Brand new, never been used
Reduces unwanted sound & most vibrations
Effectively blocks 97% of radiant heat transfer
Keeps your interior cooler in the Summer & warmer in the Winter
Extremely light-weight, flexible, & crush resistant
Creates a mold & mildew resistant vapor barrier
Non-toxic & fragrance free (Will not smell)
Very easy to cut, handle, & install.
Temperature Rating: 200 Degrees nominal
Core Material: Polyethylene closed cell foam core
Outer Material: 99.4% pure polished aluminum reinforced facing
Nominal Thickness: 1/4"(6mm)
Reinforced / Crush Resistant: Yes
Mildew & Mold Resistant: Yes
Water resistant: Yes; Non-toxic: Yes
This great product will keep the inside of your ride quiet - it's easy to install and keeps out the unwanted noise, works so good that of you put it in your doors it gives them a solid modern sound when they close.Could be used on floors, firewall, door panels, trunk, roof and any interior areas that should be insulated
No powder & Excellent vibration resistance
Excellent sound absorption properties
Will not contribute to metal corroson
Very clean, not absorb odors, odorless
Easily installs,fit all kinds of vehicle type
Self sticking backing
Note: Not to be applied directly to heat source including: exhaust pipes, mufflers or hot turbo pipes ?
Installation Notices
1. Please clean the surface you want to paste.
2. Make insulation materials and sheet metal firm fit, and play best adhesive, damping performance
3. Do not cover the chassis wiring or air holes when you installation
4. Appropriate use of adhesive tape will strengthen connections effect
5. Paste Aluminum Soundproof/Damping Plate，you could heat with a hair dryer to make it soft, then compacted by hand. If the room temperature is below 5 degrees Celsius, first with sun lamp heating it until soft. Then remove the wax paper and paste it
6. A successful installation process is best not to repeat tear paste, paste effect won't be damaged
7. The extra insulation can be pasted in some hidden place
8. It is not possible that there is an effect on the hearing by only a door installation ,it requires completed construction
9. Perfect for Industrial, Automotive, Household, and Marine Applications
In order to install soundproofing material you would need:
Auto sound deadener Mat
Stationery knife or construction scissors
A roller for rolling out sound deadening material
Gloves
Degreaser
A cloth for wiping
A pen for marking
Please note:
Material for inside use only
The allowed temperature is from -49F to 212F
Don’t use the material in high temperature parts of the car such as exhaust pipe
The material cannot be reused after dismantled
The material can be used only on clean dry metal surfaces
Please observe safety precautions